Setting modem ponsel di Ubuntu
Bus 007 Device 004: ID 0951:1603 Kingston Technology
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 064e:a101 Suyin Corp.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0fce:d030 Sony Ericsson Mobile Communications AB
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 1b1a:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Inilah hasil perintah $ lsusb di komputer saya. Apakah ponsel anda sudah terdeteksi pada bagian cetak tebal ? jika belum kemungkinan ponsel belum tertancap dengan sempurna atau pilihan mode usb pada ponsel belum tepat. Langkah berikutnya setelah ponsel terdeteksi adalah mengetikan perintah $ sudo wvdialconf (mendeteksi driver modem untuk ponsel)
Editing `/etc/wvdial.conf’.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyACM0<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyACM0<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 — OK
ttyACM1<*1>: ATQ0 V1 E1 Z — OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 — OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM1<*1>: Modem Identifier: ATI — Sony Ericsson P990i
ttyACM1<*1>: Speed 4800: AT — OK
ttyACM1<*1>: Speed 9600: AT — OK
ttyACM1<*1>: Speed 19200: AT — OK
ttyACM1<*1>: Speed 38400: AT — OK
ttyACM1<*1>: Speed 57600: AT — OK
ttyACM1<*1>: Speed 115200: AT — OK
ttyACM1<*1>: Speed 230400: AT — OK
ttyACM1<*1>: Speed 460800: AT — OK
ttyACM1<*1>: Max speed is 460800; that should be safe.
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem<*1>: Cannot get information for serial port.
ttyACM2<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyACM2<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyACM2<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.
Found an USB modem on /dev/ttyACM1.
Modem configuration written to /etc/wvdial.conf.
ttyACM1
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”internet”
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99***1#
Modem = /dev/ttyACM1
Username = ”
Password = ”
Baud = 460800
TELKOMSEL [ APN = internet/telkomsel]
User : wap
Password : wap123
Dial : *99***1#
atau
User : [KOSONGKAN]
Password : [KOSONGKAN]
Dial : *99***1#
TELKOMFLASH UNLIMITED [ APN = internet/telkomsel ]
User : wap
Password : wap123
Dial : *99***1#
atau
User : [KOSONGKAN]
Password : [KOSONGKAN]
Dial : *99***1#
TELKOMFLASH (TIMEBASED) [ APN = flash]
User : [KOSONGKAN]
Password : [KOSONGKAN]
Dial : *99***1#
Note : Buka browser dan tentukan sendiri tarif akses.
MATRIX reguler [ APN = satelindogsm/satelindogprs]
User : indosat
Password : indosat
Dial : *99***1#
MATRIX broadband [ APN = indosat3g]
User : indosat
Password : indosat
Dial : *99***1#
MENTARI [ APN = satelindogsm/satelindogprs]
User : indosat
Password : indosat
Dial : *99***1#
MENTARI (DURASI) Rp 100,-/menit [exc PPN 10%] [ APN = satelindogsm/satelindogprs]
User : indosat@durasi
Password : indosat@durasi
Dial : *99***1#
IM3 [APN : www.indosat-m3.net]
User : gprs
Password : gprs
Dial : *99***1#
IM3 (DURASI) Rp 100,-/menit [exc PPN 10%] [APN : www.indosat-m3.net]
User : indosat@durasi
Password : indosat@durasi
Dial : *99***1#
XL
User : xlgprs
Password : proxl
Dial : *99***1#
–> WvDial: Internet dialer version 1.60
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Sending: AT+CGDCONT=1,”IP”,”internet”
AT+CGDCONT=1,”IP”,”internet”
OK
–> Modem initialized.
–> Sending: ATDT*99***1#
–> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!}!} }9}#}%B#}%}(}”}’}”}”}&} } } } }%}&x };s,}5~
–> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}”} }9}#}%B#}%}(}”}’}”}”}&} } } } }%}&x };s`x~
–> PPP negotiation detected.
–> Starting pppd at Thu Nov 27 21:53:55 2008
–> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
–> –> PAP (Password Authentication Protocol) may be flaky.
–> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
–> –> CHAP (Challenge Handshake) may be flaky.
–> Pid of pppd: 6206
–> Using interface ppp0
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> local IP address 114.121.253.54
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> remote IP address 10.64.64.64
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> primary DNS address 202.3.208.10
–> pppd: ??[06][08]8?[06][08]??[06][08]
–> secondary DNS address 202.3.210.10
–> pppd: ??[06][08]8?[06][08]??[06][08]
3 Komentar
Write KomentarPulsa Elektrik termurah hanya di http://i-pulsa.com
ReplyArtikel yang bagus ... literaturnya dapat dari mana ya
Reply@josstronik : membaca, dipelajarin, dipraktekan dan di tulis ulang
Reply